Description

The Simplex 4098-9793C is an IDNet Communications Isolator Base. It provides Simplex TrueAlarm analog sensor operation and IDNet communications isolation to improve installation convenience and increase system integrity. Consequently, the Simplex 4098-9793C automatically activates the base when an output short circuit is detected. It can also be selected per base manually from the control panel to assist with troubleshooting wiring problems.

Additionally, the isolator bases power-up in isolation mode. It is directly connected to the control panel. If the output wiring is acceptable, then the isolator base will connect to the rest of the circuit. In contrast, if the output wiring is shorted, then the isolator remains isolated. The isolator reports back to the panel when it is in isolator mode. As a result, the extent of shorted wiring is reported back to the panel by identifying device addresses that are not communicating.

Features / Specifications

• Operating Temperature Range: 15° F to 122° F (-9° C to 50° C)
• Storage Temperature Range: 0° F to 140° F (-18° C to 60° C)
• Humidity Range: 10 to 95% RH, from 32° F to 122° F (0° C to 50° C)
• IDNet Connections: Screw terminals for in/out wiring, 18 to 14 AWG (0.82 to 2.08 mm2 )
• Operation is for ceiling or wall mounting
• Base-mounted LED indicates sensor status
• Isolator Base 4098-9793C is compatible with:
  • Photoelectric sensor model 4098-9714
  • Heat sensor model 4098-9733
  • Multi-sensor model 4098-9754