Description

Edwards KIR-PCD Smoke and Monoxide Detector

General limitations of CO detectors
This detector – designed to protect individuals from the acute effects of CO exposure. It will not fully safeguard individuals with specific medical conditions.
Replace the detector every ten years from the date of manufacture.
A detector installed outside a bedroom may not awaken a sleeper.
If the distance or closed or partly closed doors muffle the sounder.
CO detectors – not a substitute for life safety. They should only – considered an integral part of a comprehensive safety program.

Selecting a suitable location is critical to the operation of CO detectors. Install detectors according to applicable codes and standards.
On the ceiling in the same room as permanently installed fuel-burning appliances.
In any area required by local building codes, legislation, or the AHJ
In a suitable environment per the detector specifications.
On a firm, permanent surface.

Do not install the CO detector:
• Within 5 ft. (1.5 m) of any cooking appliance
• Within 10 ft. (3 m) of a fuel-burning appliance
• Near air conditioners, heating registers, or any other ventilation
source that may interfere with CO gas entering the detector
• Where furniture or draperies may obstruct the airflow
• In a recessed area

Edwards KIR-PCD Smoke and Monoxide Detector

Description
The model KIR-PCD Intelligent Photoelectric Smoke Detector with CO Sensor is an intelligent device. Use an optical sensing chamber to detect smoke and a CO sensor. The detector analyzes the smoke and CO sensors independently.
• Normal: Green LED indicator flashes, no action.
• Alarm/active: Red LED indicator flashes, evacuate the area.
Sensor end-of-life indicator:
The detector signals a “COMMON TRBL ACT” condition on the control panel. Pressing the Details button on the control panel displays “END OF LIFE ACT”.

Datasheet

Relative item