Description

Potter PAD200-DUCT

Description
Designed and built to meet all local requirements and the NFPA regulations regarding duct smoke detectors. Air sampling i s accomplished by two tubes that protrude into the duct. An exhaust tube of one standard length, i s supplied in the installation kit with the smoke duct unit. The duct width has b een determined the air intake sampling tubes must b e ordered.
Sampling tubes a re supplied in three standard lengths. Mounting the duct smoke unit i s accomplished by the use of a template. And 2 sheet metal screws, which are provided. Mounting can b e achieved without the removal of the clear cover which i s secured by 4 capture screws.
Application
Provides early detection of smoke and products of combustion. Present in air moving through HVAC ducts in commercial, industrial, and residential applications. The PAD200-DUCT is compatible with the IPA and AFC/ARC series addressable fire alarm control panels.

Engineering Specifications

The detectors shall b e listed by Underwriters Laboratories per UL 268A. The detectors shall operate at air velocities from 100 feet per minute to 4000 feet per minute. The duct detector housings shall b e of plastic construction. and complete mechanical installation. Performed without removal of detector cover. Visual indication of alarm and power must be provided on the detector front. Detector heads shall not require additional filters or screens which must b e maintained. The housing shall contain a detector base and PAD200-DD duct smoke detector head. Terminal connections shall be of the screw type and be a minimum of # 12 screw. All wiring must comply with local codes and regulations. The detector shall use the STN series of sampling tubes.

Potter PAD200-DUCT

Datasheet

Relative item